root-mean-square) values.
Frequency range is up to 1KHz.
3.2 Measurement Functions
3.2.1 AC and DC Voltage measurement
To avoid electrical shock and/or damage to the
instrument, do not attempt to take any voltage
measurement that might exceeds 1000Vdc or
1000Vac rms.
To avoid electrical shock and/or damage to the
instrument, do not apply more than 1000Vdc or
1000Vac rms between the common terminal and
the earth ground.
The Meter's voltage ranges are 600.0mV, 6.000V, 60.00V,
600.0V and 1000V.
To measure ac or dc voltage (set up and connect the Meter
as shown in Figure 3-1):
1. Set rotary switch to the DCV, ACV or AC/DCmV
range.
2. Connect the black and red test leads to the COM and
V terminals respectively.
3. Connect the test leads to the circuit being measured
4. Read the displayed value. The polarity of red test lead
connection will be indicated when making a DCV
measurement.
NOTE:
Unstable display may occur especially at 600mV range,
