AALTO CONTROL WMU USER GUIDE
VOT97, Rev 1.1, 1.3.2017
5
1. 5.
Setting up External Coordinator
Make sure that the external coordinator and the Aalto Control WMU unit are both connected to
the network. Type in the IP address of the external coordinator, and tap SAVE. The IP address is set
according to the local network settings. Contact you network administrator or IT-support if you do not
know the IP address. The “Info” -field is an optional free text field, that can be used for adding relevant
information about the coordinator.
If an internet connection is not needed (i.e. the email reporting is not in use) or connection to an
enterprise LAN (Local Area Network) is not wanted, it is possible to create a WMU specific address
space. This means connecting an external coordinator either directly to the ethernet connector, or to
the WMU, via a router. In this case, make sure the Aalto Control WMU and the external coordinator
are in the same address space by setting the addresses, for example, as such:
•
Local IP address: 192.168.42.39
•
Local netmask: 255.255.255.0
•
Gateway: 192.168.42.1
•
External IP address: 192.168.42.40
