AALTO CONTROL WMU USER GUIDE
VOT97, Rev 1.1, 1.3.2017
12
2. 3.
Using Filters (creating a Luminaires List)
1.
To display the desired luminaires in REPORTS view, always first tap LOCATIONS and select the
Site, Buildings and/or Areas, in which the luminaires to be shown are located.
2.
To display unassigned luminaires in the reports view, select NOT ASSIGNED
3.
You can also select all locations, or deselect all locations by tapping the corresponding buttons.
4.
To filter the luminaires, tap REPORTS and select Filter tab
•
Note 1 and Note 2: Filters the luminaires according to the Note data fields. A wildcard * can
also be used (e.g. in Note2, the value “text 3*” displays all luminaires starting with “text 3” in
Note2).
•
Selecting Failures and/or Not reached will display the desired luminaires accordingly.
•
If an external coordinator is used, the luminaires can be filtered by selecting the desired
Coordinator.
•
RF ID: filters the luminaires according to their RF ID. A wildcard * can also be used.
5.
Note that you can also select multiple filters, to optimize the results.
