Teknor Industrial Computers TEK-CPCI-1000, Technical Reference Manual

Page: 84 / 141

TEK-CPCI-1000 Technical Reference Manual
13-6
13.4.1 Menu Commands
TAG
Use this function to select a file from the above file list. Move
the cursor over the desired field and press T on your keyboard.
The file will then be highlighted - indicating it was selected.
Press T again, to deselect the file.
UNTAG
This function is used to deselect a chosen file from the above list
of files. To use this function, simply move the cursor over the
desired file and press U.
BLOCK
This function is used to mark a group of files for selection or
deselection. Move the cursor to the beginning of the first file
you wish to select and press on the B key (a "
" symbol will be
displayed after "Block" in the command area to remind you that
a block has been entered). Then, move the cursor to the last file
of the group and press B again (a "
" will appear next to the
"
" indicating that a block definition is now complete). The
block of outlined files are now ready to be "Tagged" or
"Untagged".
MAKE BOOTABLE
Choose this function to move files you wish to make bootable
into the FILE SELECTION area (to appear in the LIST OF
SELECTED FILES screen). The system will then prompt you
for the drive which contains the system files (Note that the
source should not be a Flash disk, since these are read-only and
write protected). Once the selected files are found, the "Make
Bootable" command will be changed to "BOOTABLE DISK".
This confirms that the Flash disk will be bootable.
NEWDIR
This function lets you enter or exit a drive or directory. To
change directories, place the cursor at the desired entry and press
N. The listing will automatically change to the new directory's
content.