FLASH File System II
14-5
If the card already has one MS-Flash partition, the following message appears at the bottom
of the screen:
This card has already been formatted.
Creating a partition will destroy all the data on the card.
Do you want to continue? (Y/N) [N]
Create a new partition only if you have backed up all the data that you want to save. To
continue, type "Y" and then press ENTER.
3.
If the card is unformatted or has one large partition, the following message appears:
Do you want to use the entire card for MS-Flash? (Y/N) [Y]
To create and format one large partition, type "Y" and then press ENTER; to create and
format a partition that occupies only part of a memory card, type "N" and then press
ENTER.
4.
This step is only required if you are creating a partition that will occupy only part of the
Flash device: Specify the size of the partition you want to create, and then press ENTER.
The minimum size depends on the amount of free space available on the memory card.
The number that appears on your screen is the largest amount of available space.
5.
Specify the number of spare blocks that MS-Flash should reserve for memory card
cleanup, and then press ENTER. The default is 1. Although reserving extra blocks may
speed up the memory card slightly, you will not be able to use the reserved blocks for
files. The default is recommended.
6.
Specify a volume label for the partition, and then press ENTER. If you do not want to
specify a volume label, leave the field blank, and press ENTER.
Summary of Contents for TEK-CPCI-1000
