A-1
A. BOARD SPECIFICATIONS
TEK-CPCI-1000
DESCRIPTION
Overview
Pentium/K6 based CompactPCI System Board
Supported
Microprocessors
Intel Pentium
®
166MHz,
200MHz
Intel Pentium MMX
TM
166MHz, 200MHz, 233MHz
AMD K6
166MHz, 200MHz, 233MHz
Bus Interface
PICMG 2.0, Rev. 2.1 CompactPCI compatible, 32-bit (132MB/Sec)
ISA P996 AT bus on J2, via backplane connector
System Memory
Cache Memory
Flash EPROM
Up to 512MB DRAM, using up to four 72-pin SIMMS
FPM or EDO type
Level 2: 512KB standard pipelined burst
2MB standard, 4MB optional
I/Os
USB
Two Universal Serial Bus (USB) ports, one via the front
panel, one via the CPCI backplane
Serial
Two UART serial port via the front plate. COM2 is
configurable as RS-485
Parallel
One multimode port via the front plate, through onboard
header. Supports EPP and ECP
Hard Disk
Two Enhanced IDE interfaces for up to 4 devices via the
CPCI backplane
Floppy
Two floppy disks from 360KB to 2.88MB via the CPCI
backplane
Keyboard
Standard AT keyboard via the front plate end the CPCI
backplane
Mouse
PS/2 mouse keyboard via the front plate end the CPCI
backplane
Features
BIOS
Award BIOS
256KB Boot Block Flash BIOS for instant configuration recovery
Auto configuration and extended setup
Programmable CPU and memory wait states
BIOS shadowing in RAM
Extension for diskless, keyboardless and videoless operations
Ability to boot MS-DOS and user applications from the Flash disk
Summary of Contents for TEK-CPCI-1000
