16
Figure 9
The following steps are what should be applied in the order in shots with a gradiometer.
Gradiometer with three very important points to be considered before we start shooting during shooting. The first
of these is the direction of the sensor. Sensor and should not be changed in any way during the shooting of gone
this direction should be Nort
h or South. Second, angle and ground distance of the sensor. This angle musn’t be
changed in any way, and should look as upright as possible in the place. The changes that will occur at the position
sensor is caused to display incorrectly. The sample is seen in Figure 10 the shape of the grip sensor.
Figure 10
1.
The sensor and the battery must be installed in the detector, but the detector should not be opened.The supply
voltage required for the operation from the synchronous detector. For 3D viewing does not require you to operate
your detector. If you want to turn on the detector while the sensor is plugged in will not work.
2.
Tablet must be opened and then TE 3D Viewer program must be opened on the tablet.