Tekno Point PIC-12C6, Use And Installation Manual

Page: 50 / 92

18
8.6 WALL MOUNTING
1. Once covered, place the pipes and run them through the
holes in the wall.
2. Attach the indoor unit to the template.
3. Coat the spaces between the pipes and between pipes and
the holes with the sealing rubber.
4. Fix the pipes in the wall.
5. Check that the indoor unit is installed properly on the wall.
- The drain hose must not be over-coated in order to avoid the
obstruction.
- The drain hose must follow the angle of the hole in the wall as
shown in FIG.
- The water outlet can not take place in water so as to discharge
smoothly.
- Tilt the exhaust pipe down slightly. It can not be bent.
lower hook
upper hook
sealing rubber
outdoor indoor
tube wall
The condensate
drain pipe can not be
immersed in water
INSTALLATION
50