Tekno Point PIC-12C6, Use And Installation Manual

Page: 48 / 92

16
8.2 CONNECTION PIPES
8.3 INSTALLING THE DRAIN PIPE
INS CAT
8. INSTALLATION
INDOOR UNIT
8.1 DRAIN AGE PIPE
1.
The tube can be taken out in the direction right, rear left
or right.
1. Point the tube fitting to the corresponding bell.
2. Pre-tighten the nut by hand
3. Adjust the strength of the couple according to the following
1. Connect the exhaust pipe with the outgoing pipe from the
indoor unit.
2. Secure the joint with a ribbon.
2. Once you have decided to bring out the right pipe or the
left and cut the corresponding hole on the body.
Dx
1. 2.
Sx
Right rear
cut pipe
chart. Place the open-ended wrench on the coupling of the
tube and insert the nut. Tighten the nut with a wrench.
4. Wrap the inner pipe and the coupling connection with the
insulating tube and then wrap the whole with adhesive tape.
- Wrap with insulating tube inside the exhaust pipe in order to
prevent condensation.
- The expansion plastics particles are not provided.
Ø hex nut torsion strength [Nm]
Ø 6 15 - 20
Ø 9,52 30 - 40
Ø 12 45 - 55
Ø 16 60 - 65
Ø 19 70 - 75
3.
hose coupling nut
inner tube
torque copy T
key
nut
pipe
pipe
1. 2.
tube
external
condensate
drain pipe
outer tube
of tube
exhaust
condensate
of tube
exhaust
condensate
tape
insulating
48