Section:
Date: Sept 2019
ELECTRICS
Page: 5 of 9
HAB_322a
Power Pole length
=di 3"
3 1/2"
3 1/2"
Top Portion Shown
2.5
Bottom Portion Shown
2.4
2.9
CEILING CUT OUT
STEP 5:Mark Power Pole position on the ceiling using Plum Bob line. Cut 3 1/2" x 3 1/2"
opening. Measure distance from top of the Lower Power Pole Extrusion to the ceiling. Add
approx 3" to that dimension and cut Power Pole and Power Cover to that measurement.
STEP 6: Insert Upper Power Pole extrusion inside ceiling cut-out (Uncut edge down). Place
the Bottom Surface of the Power Pole on top of Lower Bottom Extrusion and Connect them
together using connecting Plate and Screws.
INSTALL UPPER EXTRUSION
