BD-1/07-002
5
output) on your system which allow you to control some electrical devices in your
home or office. For example;
When you armed the system, your garage door can be closed automatically.
Your irrigation system can be activated in determined time/day.
When there is a fire alarm, the system can active the system of fire fighting.
You can active your climate system or your heater by phone*
Please ask your installer for details.
*This feature can not be used in VAP2xx and VAP3xx alarm panel.
2.3 Entering to the addresses and monitoring/changing system settings
Each address is a four digit number. Addresses keep system parameter(s). You can
enter to these addresses according to your code’s authorization. In order to monitor
or change system settings, when you enter to the related address (related menu in
VPC 301 keypad), system shows you what this address includes. For example;
address for system clock is <0101>. When you enter to this address, keypad shows
you current time. Please make following to enter to the master menu by using master
code (default: 1234) and monitor/change current system clock.
3. OPERATION
The following section provides you with an introduction to the buttons and indicator
lights on your keypad.
3.1.
Audible Indicators
When you enter information to the keypad, it will guide you with beep tones as
confirmation beep or rejection beep.
3.1.1. Confirmation Beep
: When any information is entered successfully or when
the system switches to a new status or mode, the keypad emits two short beeps.
3.1.2. Rejection Beep:
When an incorrect information is entered, or when the
system reverts to previous status, the keypad emits a long beep.
3.2. Light Indicators
All VAP series LED keypads have colored lights, VPC301 LCD keypad has
alphanumeric LCD screen which shows your system’s current status. (See your
keypad in Section 4).
4. KEYPADS
There are six types of keypads of VAP series security systems to allow you to access
your security system’s functions, to send commands to the system and to display the
current system status.
Enter to the master program.
1
st
step ; [Enter]
(Program) key long until you hear a long beep.
2
nd
step ; [Enter] Your 4 digit master code. (Default 1234)
Wait until you can see that program led is blinking.
[Enter]
to enter system clock
Monitor current time.
Summary of Contents for VAP Series
Page 1: ...VAP Series Alarm System User s Manual Issue Date 13 02 2007 TD 1 07 002 ...
Page 33: ...BD 1 07 002 32 ...
Page 34: ...BD 1 07 002 33 ...
Page 35: ...BD 1 07 002 34 ...
