BD-1/07-002
24
Flashing Light
Description
Power
AC Fail (Look at following Trouble)
Program
If “Program” light flashes together with “Power” light, battery is in low level
Bypass
Time/Date Trouble
Memory
Phone Line Fail
Trouble and Zone light
Flashing zone/zones has wiring program
For VPC301 keypad
;
Trouble type will be seen on LCD screen.
[Press] “Exit” button long to return back standby mode. When any new trouble
occurs, keypad returns trouble mode again.
15. TESTS
PGMs, user phone numbers and CMS can be tested during the alarm system is
standby mode.
15.1. Siren test
Siren alarms for 5 seconds.
15.2. PGM test
* There is no PGM2 in VAP2xx, VAP3xx.
** There is noPGM3 in VAP2xx, VAP3xx and VAP404.
The selected PGM is activated for 5 seconds.
15.3. Central Station Test
There is no this test in VAP204 alarm panel.
*
CMS secondary number is tested in VAP304 Alarm Panel.
**
Not active in VAP304 Alarm Panel.
Panel sends test code to Central Station.
[Press] (Report) key long until you hear long beep.
[Press] key.
[Press] (Test) key long until you hear long beep.
[Press] key and then key.
[Press] (Test) key long until you hear long beep.
[Press] and then key (for PGM1)
key (for PGM2)*
key (for PGM3)**
[Press] (Test) key long until you hear long beep.
[Press] and then key (for central. station 1)
key (for central. station 2)(*)
key (for secondary number of central. station 1)(**)
key (for secondary number of central. station 2) (**)
Summary of Contents for VAP Series
Page 1: ...VAP Series Alarm System User s Manual Issue Date 13 02 2007 TD 1 07 002 ...
Page 33: ...BD 1 07 002 32 ...
Page 34: ...BD 1 07 002 33 ...
Page 35: ...BD 1 07 002 34 ...
