BD-1/07-002
22
13.2. Monitoring and Controlling Event Log
For VPC104 keypad;
For VPC016, VPC104, VPC108, VPC116 and VPC132 keypads;
For VPC301 keypad;
14. REPORTS
14.1. Armed Zones
Armed zones and partitions begin flashing with armed light (if available). Keypad
returns standby position after 5 seconds. In VPC301 keypad, you will see the armed
zones on the LCD.
14.2. Last Zone that Alarms
Keypad displays last zone and partition that alarms.
14.3. PGM Status
Keypad displays PGM status.
[Press] (Memory) key long until you hear long beep.
You will see “h” on the LED display, and then you will see the event by digits in order.
[Press] key to go forward and [Press] key to go back in event memory.
[Press] (Exit) key long to exit from event log.
[Press] (Memory) key long until you hear long beep.
“Power” light starts flashing and keypad displays last event. Keypad reads event by digits in
order. After reading event, all zone lights start flashing to inform reading of the event has
finished then keypad displays that event again.
[Press] ”A” button to go forward and [Press] “D” button to go back in event memory.
[Press] (Exit) key long to exit from event log.
[Press] (Memory) key long until you hear long beep.
You can see the last event on the LCD
[Press] ”A” button to go forward and [Press] “D” button to go back in event memory.
[Press] (Exit) key long to exit from event log.
[Press] (Report) key long until you hear long beep.
[Press] key.
[Press] (Report) key long until you hear long beep.
[Press] key.
[Press] (Report) key long until you hear long beep.
[Press] key.
Summary of Contents for VAP Series
Page 1: ...VAP Series Alarm System User s Manual Issue Date 13 02 2007 TD 1 07 002 ...
Page 33: ...BD 1 07 002 32 ...
Page 34: ...BD 1 07 002 33 ...
Page 35: ...BD 1 07 002 34 ...
