C l e a r L i n k H a r d w a r e M a n u a l / R e v . 1 . 0 0
5
T
EKNIC
,
I
NC
.
P H O N E ( 5 8 5 ) 7 8 4 - 7 4 5 4
Safety Information
Precautionary Statement
Always follow appropriate safety precautions when installing and using any
automated motion control equipment. Motion control systems should be
designed and utilized to prevent personnel from coming into contact with
moving parts and electrical contacts that could potentially cause injury or
death. Read all cautions, warnings, and notes before attempting to install or
operate this device. Follow all applicable codes and standards when using
this equipment. Failure to use this equipment as described may impair or
neutralize protections built into the product.
General Disclaimer
The User is responsible for determining the suitability of this product for his or
her application. The User must ensure that Teknic’s products are installed
and utilized in accordance with all local, state, federal and private governing
bodies and meet all applicable health and safety standards.
Teknic has made all reasonable efforts to accurately present the information
in the published documentation and shall not be responsible for any incorrect
information which may result from unintentional oversights.
Due to continuous product improvements, the product specifications as stated
in the documentation are subject to change at any time and without notice.
The User is responsible for consulting a representative of Teknic for detailed
information and to determine any changes of information in the published
documentation.
Should Teknic’s products be used in an application that is safety critical, the
User must provide appropriate safety testing of the products, adequate safety
devices, guarding, warning notices and machine-specific training to protect
the operator and/or bystanders from injury.
