FOR ALL THE MODELS:
80
During cooking it suddenly starts to beep
There is a cloth, container
or some liquid on top of the
keypad.
Remove any object that is
covering the keypad, and/or
clean up any liquids split on
it.
There is a cloth, container
or some liquid on top of the
keypad.
One or several of the hobs
has overheated.
Remove any object covering
the keypad.
Press the timer sensor to
deactivate the beeping.
The timer was switched on
and the programmed time
has elapsed.
The hob (or one of the hotplates) turns off during cooking
Leave the overheated hobs to
cool down for a few minutes
before turning them on again.
The lock is activated.
Deactivate the lock.
There is moisture on the
sensors and/or you have
moist fingers.
Keep the keypad surface
and/or your fingers clean and
dry.
The touch control will not turn on or, when it is on, it does not respond
Sobretensión en la red de
distribución eléctrica
Contacte con el Servicio
Técnico
The glass has reached an
excessive temperature.
Take the pan off the hob and
allow the glass to cool.
A hob turns off and the message:
E2
is displayed.
Message
U400
and the beeping signal
MODEL VI TC 30 2I
Fault
Possible cause
Possible solution
Before calling the Technical Service, please
make the following checks:
If something doesn’t work
GB
Continuous beeping, disconnection of control and symbol
on displays
There is an object or
liquid covering up the
touch control.
Remove the object or liquid
that is covering the touch
control.
Summary of Contents for VI TC 30 2I
Page 2: ...2...
