ACTIVATING THE HEATING ELEMENTS
Once the touch control panel has been
activated by using sensor button
(1),
you can turn on the chosen heating ele-
ments.
1
With the sensor button
or
(5/4),
choose the desired power level (from
1
to
12
).
1
With the sensor button
or
(5/4)
choose the desired power level (from 1
to 12).
2
Place cookware over the cookware
zone. The cookware recognition func-
tion will activate the induction coil.
The sensor buttons
and
are repetiti-
ve, so if you keep your finger pressed on
the sensor buttons they will increase or
decrease in a continuous manner.
The appliance will disconnect if no cook-
ware has been placed on the cooking zone
after 10 minutes have passed since the
cooker has been turned on.
To rapidly turn the heating element on
to the maximum power:
choose the hea-
ting element and touch sensor button
(4). The heating element will activate at its
maximum power level (level
12
).
TURNING OFF THE HEATING ELEMENT
1
Use sensor button
(4) to lower the
power level to level
0
. The heating ele-
ment will turn off automatically.
To rapidly turn the induction element
off:
regardless of the power level, if you
simultaneously touch sensor buttons
and
(5/4), the heating element will
turn off immediately.
When a heating element is turned off, an
H
will appear in the corresponding power
indicator if the glass surface is hot in the
corresponding cooking zone, which means
that there is a risk of burns. When the tem-
perature has decreased, the indicator will
turn off (if the hob is disconnected) or, if
the hob is connected, the indicator will
have a
0
.
TURNING OFF THE APPLIANCE
The device may be turned off at any time
by touching the general on/ off sensor but-
ton
(1). In stand-by mode, an
H
will
appear in the zones that are hot. The indi-
cators of the rest of the heating elements
will not light up.
After use, disconnect the device
using the control; do not rely on the
cookware detector.
Locking the hob's sensors
The safety function can be activated after
connecting the hob. To do so, touch sen-
sor button
(1) to activate the touch con-
trol. Immediately touch sensor buttons
(7) and
(4) at the same time. The
indicator light of the "Stop" function (8) will
turn on, which indicates that the control
panel is locked, except for sensor button
(1).
The electronic control will remain locked,
even after disconnecting the control using
sensor button
(1) until the user unlocks it.
Unlocking to cook
If you want to unlock the control and cook,
touch sensor button
(1) to activate the
touch control. Immediately afterward touch
sensor buttons
(7) and
(4). The indi-
cator light of the "Stop" function (6) will turn
off, which indicates that the control panel
is unlocked.
GB
70
Summary of Contents for VI TC 30 2I
Page 2: ...2...
