GB
69
* Change the timer time by following the
steps described in the section
"Modifying the programmed time" until
the timer reaches
00
.
NOTE: it is possible to set the time for
a heating element that has a
0
power
level. In this case, the timer will work as
a chronometer counting backwards.
Touch control user instruc-
tions (model VI TC 30 2I)
CONTROL PANEL ELEMENTS
(see fig. 5)
On/off sensor button.
Indicator light of the heating element.
Power, time and residual heat indica-
tors.
Power/time reduction sensor button
(less).
Power/time increase sensor button
(more).
"Stop" function sensor button.
Timer/chronometer selection sensor
button.
Indicator light of the activated locking
option.
Indicator light of the timed heating ele-
ment.
NOTE:
* Only visible when device is in
operation.
Actions are carried out using the sensors
marked on the control panel.
It is not necessary put pressure on the
glass; by simply touching the sensor button
with your finger you will activate the desired
function.
Each action is confirmed with a beep.
TURNING ON THE APPLIANCE
1
Touch the on sensor button
(1) for at
least one second.
The touch control panel is activated and all of
the power level indicators (3) have a
0
. If a
cooking zone is hot, the corresponding indi-
cator will have an
H
instead of a
0
.
The next action must be taken within 10
seconds; otherwise, the touch control
panel will automatically turn off.
When the touch control panel is activated,
it can be disconnected at any time by tou-
ching sensor button
(1), ieven if it has
been locked (safety lock function activa-
ted). Sensor button
(1) is always able
to disconnect the touch control panel.
fig. 5
1
2
3
9
4
5
6
8
7
Summary of Contents for VI TC 30 2I
Page 2: ...2...
