24
GB
The controls are all operated by using the
sensors, each of which has an indicator
associated with it. There is no need to
apply pressure to the glass on the sensor
you wish to use - the function is activated
simply by touching it with your fingertip.
Each action is confirmed by a beep.
SWITCHING ON THE APPLIANCE
1
Touch the On sensor
(1) for at least a
second.
The touch control is activated and an
0
appears on all the power indicators (3) and
the decimal point (13) flashes on and off.
The operation below must be carried out
within 10 seconds (20 seconds on the
models TT 600, TT 630, TB 600, TR 600,
TC 620 and TR 735 AB), or the touch con-
trol will automatically switch off.
SELECTING THE HOTPLATE TO BE
SWITCHED ON
Once the touch control has been activated
using the sensor
(1), hotplates can be
freely turned on.
1
Touch the chosen hotplate's sensor (2). A
0
appears on the corresponding power
indicator (3), and the decimal point (13)
comes on to show that the hotplate is
selected (ready to be controlled).
2
Using sensor
or
select the power
that you want (4/5).
On models TT 600, TT 630, TB
600, TR 600, TC 620 and TR 735 AB, the
sensor
has a double function: to select
the hotplate (first press) and to increase
the power (touch when the hotplate is alre-
ady switched on).
The power sensor needs to be touched
within 5 seconds after choosing the hot-
plate, or the hotplate will switch off and will
have to be reselected.
Sensors
and
are repetitive, so if you
keep your finger on them, they go up or
down in 0.5 second intervals.
Only one hotplate can be selected at a
time (2), which means that only one deci-
mal point (13) will be lit up.
fig. 9
Models TS 600, TR 640, TT 640, TZ 640, TR 620, TZ 620 and TT 620
