hot, its display will show an
H
, otherwise it
will show a
0
. Touch any sensor to switch
off the beeping signal.
Changing the programmed time
The time that you have set can be chan-
ged. To do so, touch the clock sensor
(7) until the display of the corresponding
hotplate (10) flash on.
Then you will be able to read and change
te time.
Disconnecting the clock
If you wish to stop the clock before the pro-
grammed time has elapsed:
1
Touch the clock sensor
(7) so many
times as it's needed, until the display of
the corresponding hotplate (10) flash
on, or just select the hotplate and touch
the clock sensor
(7).
2
Make sure the decimal point is light (11)
in the indicator (8).
3
Use sensor
(4) to reduce the time
down to
00
. The clock is cancelled.
Switching off quickly
Repeat the steps1 and 2.
3
Touching the
and
sensors (5 and
4) at the same time cancels the remai-
ning time.
The clock as a countdown timer
Whenever the clock is not being used in
conjunction with a cooking area, it can be
used as a countdown timer.
SWITCHING THE COUNTDOWN TIMER
ON
When the appliance is switched off.
1
Touch the timer button
(7) as many
times as necessary, until the correspon-
ding countdown timer light (13), located
in the centre, below the timer displays
(8), turns on.
2
Make sure the decimal point is light (11)
in the indicator (8).
3
Use sensors
and
(4/5) to set the
time.
After the set time has elapsed, a series of
beeps will be emitted for several seconds.
To turn off these beeps touch any of the
buttons, except the On/Off button
(1).
Adjusting the Programmed Time
To adjust the programmed time, hold down
the timer button
(7) until the countdown
timer light (13) flashes. You can then see
the time and adjust it.
DISCONNECTING THE COUNTDOWN
TIMER
If you wish to stop the countdown timer
before the programmed time has elapsed:
1
Touch the timer button
(7) as many
times as necessary, until the correspon-
ding countdown timer light (13) turns on,
located centrally, below the timer dis-
plays (8).
2
Make sure the decimal point is light (11)
in the indicator (8).
3
Use sensor
(4) to reduce the time to
00
. The clock is cancelled.
GB
24
