used for cooking.
LOCK FUNCTION
(models ...604)
Using the sensor lock
(5) you can lock
the entire unit, except the on/off sensor
key
(1), in order to protect the unit from
unwanted use. This is a useful safety func-
tion when there are children in the home.
When the lock is activated, the light (10)
goes on.
If you turn off the device using the on/off
sensor key
(1) at the same time that the
lock is activated, the device will continue to
be locked the next time it is turned on.
Function for keeping a pan hot
(models …622)
Using this function, it is possible to keep
food hot in a pan placed on the cooking
area.
1
There is a pan on one of the heating ele-
ments at a previously selected cooking
temperature.
2
It is necessary to touch sensor
(12),
after which the symbol
will appear in
the indicator.
To disconnect this function, just touch sen-
sor
(12) again and the heating element
will turn off, or, as an alternative, it is pos-
sible to touch sensor
(2) and change to
level 1. This function will only work for a
maximum of 120 minutes, after which the
hob will disconnect.
Timer function
This feature enables you to do your coo-
king while you are not present: You can set
the timer for a hotplate and it will switch
itself off automatically when this time has
elapsed.
Around the selected time display there are
4 or 3 pilot lights that indicate which hotpla-
te is being timed. For example, if you time
the upper left hotplate as you look at the
appliance, the pilot light that will come will
be the one above the display and to the left.
Where no hotplate is being timed (no pilot
light (9) is on), the clock can be used as a
countdown timer (see the section "The
clock as a countdown timer").
You can use the clock as a countdown
timer for periods of between 1 and 99
minutes, and as a hotplate timer for times
of between 1 and 99 minutes. All the coo-
king areas can be programmed indepen-
dently and simultaneously.
Timing a hotplate
1
The hotplate to be timed has to be selec-
ted. The corresponding decimal point
(11) must be lit.
2
Select a power level of between
1
and
9
using the
or
sensors (2/4).
3
Touch the clock sensor
(7). The deci-
mal point (11) of the time display (8)
(which shows
00
) will come on, and it
will flash on and off along together with
the pilot light (9) of the corresponding
hotplate.
4
Touch the clock sensor
(7) again to
increase the value of the time you wish
to set, or
(4) to decrease it (from 1 to
99 minutes). You can keep your finger
on the
or
sensors (7/4) to make
the minutes pass by automatically and
make your selection more quickly.
The clock will begin to control the time
automatically. The control display (8)
GB
18
