Tegam 2711A, Operation Manual

Page: 96 / 98

INDEX - II
P
panel
front II
rear III
power mains setting III
program message terminator 8-6, 8-11
program message unit 8-4, 8-11
pulse wave 3-3, 7-9
R
ramp wave 3-3, 7-9, 7-12
reference clock 3-4, 7-7
remote 7-8
reset 6-2, 7-7, 7-12
resolution,
response message terminator 8-6, 8-11
response message unit 8-4, 8-11
RS-232 overview 8-2
S
sample clock 1-4, 2-3, 3-3, 7-9
sample clock rate 1-4, 2-2
scaling 2-3
sequence
generator 2-5, 8-25
waveforms 1-9, 2-5, 3-3, 7-6, 7-11
service request enable (SRE) 8-9
sin(x)/x wave (sinc wave) 3-3, 7-10, 7-12
sine wave 3-3, 7-9, 7-12
size 2-5, 7-10, 8-18
slave mode 3-2, 5-3, 7-9
specification VI
square wave 3-3, 7-9, 7-12
service requst enable (SRE) register 8-9
service request (SRQ) 8-10
stacked queries 8-16
standard waveforms 1-3, 1-7, 2-5, 7-6, 7-9
standard waveform list 3-7
status and event registers 8-4, 8-9
status byte (STB) 8-9
sync
output 2-6
trigger pulse 5-4
syntax 8-4, 8-11
system commands 7-7, 8-17
T
test equipment required 6-2
toggle mode 3-2, 7-9
triangle wave 3-3, 7-9, 7-12
trigger input III, 2-7, 5-2, 5-3
trigger mode 3-2, 7-9
U
user-defined waveform (arbitrary waveform)
1-8, 2-5, 3-3, 3-5, 7-6, 7-9
V
verification test
amplitude accuracy 6-3
DC offset accuracy 6-3
frequency accuracy 6-2
total harmonic distortion (THD) 6-3
waveform rise/fall time 6-2
vertical resolution 2-4
W
waveform
commands 7-9, 7-10
creation system 4-3
cycle 2-2
generation 2-2
samples 2-3
segments 2-3
sequence 1-9, 2-5, 3-3, 7-6, 7-11
size 2-5, 7-10, 8-18
standard 1-3, 1-7, 2-5, 7-6, 7-9
user-defined (arbitrary) 1-8, 2-5, 3-3, 3-5,
7-6, 7-9
window 4-2
waveform memory format
bianry download test program 8-23
binary waveform download 8-20
decimal waveform download 8-19
example 8-21
WaveWorks Jr. 4-2, 4-3, 4-4
INDEX