TEFAL RK814E32, Manual

Page: 19 / 98

19
EN
• “Do It Yourself” function is to memorize your favorite cooking choices.
• You could select DIY1 , DIY2 or a combination of DIY1 & DIY2.
• Press «DIY» key to select the corresponding DIY function under standby
status, the multicooker will first enter “DIY” setting status with the screen
displaying the default cooking time, and the light of “Start” flickering.
• 2 possibilities for DIY setting : if you want to have stable temperature
and time for your program , press “Temperature / Time” to defined your
setting.
• If you want to use a menu as basis of your program, press menu key to
select your desiring cooking program. After select you menu, you can
modify it setting thanks to “Temperature / Cooking time”.
• At the end of cooking, the buzzer will ring three “bip”, the multicooker
will enter keep warm status with the “Keep Warm” indicator turning on
and the screen will start to count the time of keeping warm.
Note:
Certain cooking programs are defined as fully automatic programs,
hence the temperature and/or cooking time adjustment is not possible.
The multicooker memorizes the last temperature and cooking time
DIY setting for your next use.
A long press (8 seconds) on DIY key will reset the memorization.
To protect the appliance, there is a temperature/time setting
restriction in DIY function:
Between 40-100°C, the cooking time range is 1min - 9h
Between 105-160°C, the cooking time range is 1min - 2h
DELAYED START FUNCTION
• To use the delayed start function, choose a cooking program and the
cooking time first. Then, press the key «Delayed start» and choose the
preset time.
•
The preset time corresponds to the time for end of cooking.
• The default preset time will change depending on the selected cooking
time. The Range of preset is from 1 up to 24 hours.
• Each press of «<» and «>» key can increase or decrease the delayed start
time.
• When you have chosen the required preset time, press the «Start» key to
enter cooking status, the «Start» indicator will remain on and screen will
display the number of hours you have chosen.
DIY FUNCTION