DynaJet
®
Flex 7140
OPER
ATION
INITIAL ST
AR
TUP
INTR
ODUC
TION
APPENDIX
20
www.teejet.com
MENU OPTIONS
Driver and Nozzle Information
Specific driver and nozzle information can be accessed using the NEXT PAGE button
.
Figure 4-10: Driver and Nozzle Overview
Previous/Next Driver
Next Nozzle on Driver
Page navigation
Driver Information
Nozzle Information,
Dual Nozzle Mode
Nozzle Information,
Single Nozzle Mode
Location
Location
Number
Voltage
Current
Software Version
Table 4-3: Driver and Nozzle Information
Feature
Description
Driver Information Box
Displays the numeric position of the driver, current voltage, software version, and type
Nozzle Information Box
Displays the selected nozzle number, location and current through the coil
Nozzle Location
Location is notated with the driver number (D) and output number (N) and may include an (A) or (B)
distinction for the solenoid position when in Dual Nozzle Mode
Next Nozzle
Press to view the next nozzle on the selected driver
Drivers and nozzles are numbered from left to right while facing in the machine’s forward direction.
Error Warnings
Errors with components of the system are displayed graphically on
the Diagnostics screens to help the operator locate any problems.
NOTE: Operation errors appear on the Work screen. See the
Operation chapter for details.
Use these button to navigate through the errors:
Refresh Error Log – Press to clear the error log counts
to zero, including ignored errors, then checks for new
errors
Next Error – Press to view the next error when multiple
errors occur
Ignore Error – Press to disregard an error (not all errors
can be ignored)
Figure 4-11: Error Warning Navigation
Refresh error log
Next error
Ignore error
