P. 6
Tecshow Navigator 24 MKII |
English version
4. OPERATION GUIDE
Begin Programming
Record Enable
1. Press and hold down the Record button.
2. While holding down the Record button, tap the
Flash buttons 1, 6, 6 and 8 in sequence.
3. Release the Record button, the Record LED
lights up, now you can begin programming your
chase patterns.
Note:
The first time you turn on your unit, the
default setting of the Record Code is Flash buttons
1, 6, 6 and 8. You may change the Record Code to
protect your programs.
Rear View
35.
Power Switch
- This switch controls turning on
or off of the power.
36.
DC Input
- DC 12-20V, 500 mA Min.
37.
MIDI Thru/Out/In
- MIDI ports for connection to
a sequencer or MIDI device.
38. DMX Out
- This connector sends your DMX value
to the DMX fixture or DMX pack.
39.
Audio Input
- This jack accepts a line level au
-
dio input signal ranged from 100mV to 1Vpp.
40.
Remote Input
- Black Out and Full On may be
controlled by a remote control using a standard
1/4"stereo jack.
41.
Fog Machine Connector
35
36
37
38
39
40
41
