manualshive.com logo in svg

TECOM GW6000, Administrator'S Manual

Share
Download
TECOM GW6000 Administrator'S Manual Download Page 60

GW 6000 Administrative Guide                                                                                               Configuration 

Subscriber Information 

Trunk Number

: The assigned phone number from Uplink Server.

 

Register Expires

: how long the Gateway sends REGISTER to uplink registrar server. 

It counts based on second.

 

Auth ID

: The Account ID of registration to uplink server. It’s used for Digest 

Authentication. 

Auth Password

: The Password of registration to uplink server. It’s used for Digest 

Authentication.  

SIP Proxy

: the position of uplink registrar server. Digital IP address and domain 

name are all supported. 

SIP Proxy Port

: SIP signal port of uplink registrar server. 

Outbound Proxy

: the address of uplink outbound proxy server. All sip request 

packet will be sent to this server that will determine their next hops. 

Outbound Proxy Port

: SIP signal port of uplink outbound proxy server. 

Local Port 

Local SIP Port for IP Trunk

: SIP control signal packet Port of IP Trunk Client. 

Local RTP Port for IP Trunk

: Real-Time Protocol packet Port of IP Trunk Client. It’s 

the start RTP port address for these IP Trunks. 

6.6.2.2 Trunk Group 

This page allows you to configure the virtual Trunk Group, up to 4 Trunk Groups are 
supported.(Figure 6-30) 

Trunk Group & Label 

This item allows you to assign physical Trunk to virtual Trunk Group. And you can 
configure your personal string as incoming Caller ID number. For three PSTN lines 
and eight IP lines you can choose from Group1 to Group 4. 

Trunk Group Priority 

This Item allows you to define 4 Trunk Group's interior priority. For four groups you 
can choose IP first or PSTN first. This will take effect if call routing entry’s 
destination has been set as Group choice. 

Copy Right 2006 Tecom, Co. LTD. All rights reserved 

Page 60 of 107 

Summary of Contents for GW6000





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands