manualshive.com logo in svg

TECOM GW6000, Administrator'S Manual

Share
Download
TECOM GW6000 Administrator'S Manual Download Page 19

GW 6000 Administrative Guide                                                                                           Quick Installation 

5. Quick Installation 

This Quick Installation help to you install the product quickly and easily. For detailed 
instructions on installation, and further setup option, please refer to the configuration 
chapter. 

5.1 Connecting the GW6000 

(1)

 Place GW6000 in an optimum location.  

(2) Connect the included Category 5 Ethernet network cable to the GW6000’s LAN port 
or WAN port. Then connect the other end of the network cable to a switch or hub or 
directly your PC’s Ethernet port. The GW6000 will then be connected to your 10/100 
network. 
(3) Connect the AC power adapter to the GW6000’s Power port. Only use the power 
adapter supplied with the GW6000. Use of a different adapter may result in product 
damage. 
(4) Press the reset button on the rear panel to set the GW6000 to factory default settings. 
(5) Now that you have connected the GW6000 to your network, you are ready to begin 
setting it up. The Setup Wizard will take you through all necessary steps to help you to 
configure the GW6000 easily. 
 

5.2 Wizard Setup 

This system administrator can configure the GW6000 remotely or locally via a Web 
Browser. When GW6000 return to default factory settings, its LAN address is 
“192.168.1.1” , and username is “admin”, password is “admin”. 

Wizard Setup allows system administrator to select the appropriate operation mode and 
configure the corresponding setting step by step. The following eight items are 
supported. 

z

 WAN 

Settings 

z

 LAN 

Settings 

z

 Wireless 

Basic 

z

 Wireless 

Security 

z

 Internet 

Time 

z

 Numbering 

Plan 

z

 IP 

Trunk 

z

 

Call Routing Table 

In the configuration, the administrator presses “Next” or “Back” button to choose the 
setting item. If pressing “Exit & Reboot”, it will asks whether store settings. If choose Yes, 
the settings will be saved and the GW6000 will be reboot automatically. From now on, if 
entering the GW6000 Web configuration, it goes to home page “

Intelligent Gateway

” 

directly. 

5.2.1 WAN Setting 

There are three modes that you can configure WAN IP address: Static IP mode, DHCP 
mode and PPPoE mode. You can also select to enable or disable Firewall and IGMP. 

Note that Network Address Translation function (NAT) is default enabled and is not 
showing on the page to prevent it from being disabled. 

Copy Right 2006 Tecom, Co. LTD. All rights reserved 

Page 19 of 107 

Summary of Contents for GW6000





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands