GW 6000 Administrative Guide
Introduction
1. Introduction
Congratulate on becoming the owner of the GW6000.Your LAN (local area network) and
WAN (wide area network) will now be able to access the Internet using your high-speed
Ethernet connection. This Administrator Manual will show you how to install and set up
your GW6000.
The IG (Intelligent Gateway) provides a variety of functions for users and can support a
wide range of application in a complicated environment. Therefore, it needs
Administrator to plan, install and set the whole environment of VoIP communication. And
the knowledge of modern network and Internet technologies are essential for
administrator.
Analog Phone
ADSL Modem / Cable Modem
WiFi Phone
Notebook
PC
Figure 1-1. Router Connection Diagram
Interfaces
z
WAN Interface: 10/100Base-T Ethernet port
z
CO Interface: 3 FXO (Loop Start, for PSTN)
z
Analog Device Interface: 1 FXS (for analog Telephone or FAX)
z
LAN Interface: 4 Ethernet (10/100Base-T)
z
Built-in 802.11g Wi-Fi access point
Terminals
z
1
Analog
Terminal
z
24 IP Stations (Wired/Wi-Fi IP Phone)
In principle, the Administration is required to do the following things:
(1) To understand the architecture, resources, and devices of whole environment
which will be involved with the VoIP communications.
(2) To build a common setting file for most users.
Copy Right 2006 Tecom, Co. LTD. All rights reserved
Page 5 of 107
