AR1061 1-port Ethernet ADSL2+ Router User‘s Manual
Page 7 of 59
it were connected directly to the PSTN Line (also called as ADSL line now)
3. Connect RJ-45 Ethernet Cable from your PC to AR1061 Router Ethernet port. If
you have two or more PC systems, you have to prepare a low-density Ethernet
switch or hub for expansion purpose.
4. Connect the AC Power Adaptor (15V) and then the AR1061 Router will start to run
and connect the Home local network to the Broadband world.
3.3 The I/O Port Definition
The definition for each port is shown in the following Table.
ADSL RESET ETHERNET ON/OFF
POWER
No Part Name
Description of function
1
POWER
Please use the standard power adaptor supplied in the package
(15VDC/500mA).
2
ON/OFF
The power On/Off control Switch
3
ETHERNET
RJ-45 Jack 100/10Mbps Ethernet port for connecting to PC/
Notebook/ Switch
3
RESET
Reset the settings to the factory defaults
(*)
4
ADSL
RJ-11 Jack to connect to Twisted Pair copper network.
(*)
To
reset the modem to factory default settings
, please press the Reset button
in the back (with a pen, for instance) and hold it for at least 10 seconds, then release.
After 10 seconds aprox., the Power LED will become red, which indicates the
MODEM is in process of restarting, and the Ethernet LED will be blinking green.
After another 20 more seconds aprox. all LED indicators will be green, indicating that
the reset has been successfully performed.
