TECO TECO 36 TOP, Instruction Manual

Page: 88 / 330

88 User’s manual
5. LIFTING/HANDLING
In order to remove the machine from the pallet,
hook it as shown in figure 7.
This lifting point must be used whenever you
need to change the position of the machine. Do
not attempt to move the machine until it has been
disconnected from the power and pneumatic
supply networks.
5.1 INSTALLATION AREA
WARNING
Install the machine in compliance with all the applicable safety standards, in-
cluding, but not limited to, those issued by OSHA.
CAUTION
IMPORTANT: for the correct and safe operation of the equipment, the ambient lighting
level should be at least 300 lux.
CAUTION
IMPORTANT: Do not install the machine outdoors. It is designed to be used in closed,
covered areas.
DANGER
RISK OF EXPLOSION OR FIRE. Do not use the machine in areas that could be
exposed to inflammable vapours (petrol, paint solvents, etc.).
Do not install the machine in a narrow area or position it below floor level.
7