Tecnoware UPS EVO DSP PLUS 1.0 MM, User Manual

Page: 5 / 42

ENGLISH
UPS EVO DSP PLUS 1 User’s manual
User’s Manual - English
Safety Warnings

Read this manual carefully and completely before installing and using the EVO DSP PLUS
Uninterruptible Power Supply, which, from here after, will also be referred to as UPS.

The UPS must be used only by properly trained personnel. To ensure correct and safe
operations, it is necessary that operators and maintenance personnel observe the general
safety Standards as well as the specific instructions included in this manual.

Risk of electric shock: do not remove the cover. The UPS contains internal parts which are at a
high Voltage and are potentially dangerous, capable of causing injury or death by electric
shock.
 There are no internal parts in the UPS which are user serviceable. Any repair or maintenance
work must be performed exclusively by qualified technical personnel authorized by producer.
The producer declines any responsibility if this warning is disregarded.

The electric installation has to be done by qualified personnel. Follow all the Safety Standards
(CEI Standards in Italy or IEEE elsewhere) for the Input/Output connections and for the right
section of Input/Output cables.

It is compulsory to ground the UPS according to Safety Standards.

Risk of electric shock at the Output lines when the UPS is ON.
 Risk of electric shock at the Output lines while the unit is connected to the AC utility line.

For respect of the Safety Standards is necessary the presence of a differential circuit breaker
between UPS Output lines and the loads.

We recommend to use a dedicate AC power line for the UPS.

Do not obstruct ventilation slots or holes and do not rest any object on top of the UPS.
 Do not insert objects or pour liquids in the ventilation holes.
 Install the UPS indoors, in a protected, clean and moisture-free environment.

Do not expose to the direct sun light.

Do not keep liquids, flammable gases or corrosive substances near the UPS.