background image

12 

 

 

6. DISPOSAL OF THE APPLIANCE 

In accordance with Directive 2012/19/EU on the disposal of waste electrical and 
electronic  equipment,  the  crossed-out  wheeled  bin  symbol  on  the  equipment 
indicates that the product was placed on the market after 13 August 2015, and 
that at the end of its services life it must be disposed of separately from other 
waste.  
At the end of the appliance’s service life, the user must, therefore, deliver it to 
the  appropriate  centres  (recycling  centres)  for  the  separate  collection  of 
electrical and electronic waste. 
All  TECNOEKA  appliances  are  made  of  recyclable  metal  materials  (stainless 
steel,  galvanised  sheet  metal,  iron,  copper,  aluminium,  etc.)  which  make  up 
more  than  90%  of  the  total  weight  of  the  appliance.  Before  disposing  of  the 
appliance,  it  is  recommended  to  make  it  unusable  by  removing  the  power  supply  cable  and 
removing the mechanism for closing compartments and/or openings, if any.  
The  separate  waste  collection  and  subsequent  treatment,  recovery  and  disposal,  are  co nducive  to 
the  production  of  equipment  with  recycled  materials  and  reduce  the  negative  effects  on  the 
environment and health possibly caused by incorrect waste handling. Illegal disposal of the product 
by the user entails the application of administrative penalties. 
 

7. CONVENTIONAL WARRANTY

 

The  Tecnoeka  product  is  designed  for  food  use  only  and  is  covered  by  warranty  according  to  law 
(art.  1490  and  subsequent  articles  of  the  Italian  Civil  Code)  for  Professional  Customers  or 
customers  who  purchase  from  the  Dealer  with  a  VAT  number.  The  Tecnoeka  product  is 
professional and certified according to IEC EN 60335-1 and can only be sold to professional users. 
With  the  exclusion  of  any  additional  warranty,  the  Vendor  agrees  to  repair,  at  its  sole  discretion, 
only those parts of the products that prove to be tainted by an original fault as long as, subject to 
forfeiture,  the  customer  has  reported  the  fault  within  12  months  from  the  date  of  purchase  and 
reported  the  defect  within  8  days  from  the  date  of  discovery,  in  writing,  attaching  a  copy  of  the 
invoice, receipt or tax receipt as proof of purchase. 
Including the event  in  which the customer  is  unable to produce the invoice, receipt  or tax receipt 
proof  of  purchase  or  the  terms  outlined  above  are  not  complied  with,  the  warranty  is  expressly 
forfeited in the following cases: 
1)Faults or breakdowns of components caused by transport. 
2)Damage deriving from inadequate electrical, hydraulic and gas supply systems compared to that 
provided in the installation manual, or anomalous operation of the same. 
3)Damage  deriving  from  the  incorrect  product  installation,  or  installation  not  in  accordance  with 
the  installation  manual  and,  in  particular,  damage  due  to  inadequacy  of  the  flues  and  drains  to 
which the product itself is connected. 
4)Use of the product for purposes other than its intended use, as specified and resulting from the 
technical documentation issued by Tecnoeka. 
5)Damage  due  to  the  use  of  the  Product  not  in  accordance  with  the  instructions  in  the  use  and 
maintenance manual. 
6)Tampering with the product. 
7)Product adjustment, maintenance and repair interventions carried out by unqualified personnel.  
8)Use of non-original spare parts or not authorised by Tecnoeka. 
9)Damage or defects caused by negligent and/or imprudent  use of the product, or in contrast with 
the instructions prescribed by the use and maintenance manual.   
10)Damage  caused  by  fire  or  other  natural  events  and,  in  any  case,  by  fortuitous  events  or  any 
other cause beyond the manufacturer’s control. 
11)Damage to components subject to normal wear that require to be periodically replaced.   
Also  excluded  from  the  warranty:  painted  or  enamelled  parts,  knobs,  handles,  mobile  or  removal 
plastic  parts,  light  bulbs,  glass  parts,  gaskets,  electronic  parts  and  any  access ory  parts  and 
transport from the consumers, final user and/or purchases location to Tecnoeka srl and vice versa. 
Replacement  costs  of  the  oven  and  relative  installation  expenses  are  also  excluded  from  the 
warranty.  The warranty does not cover Products purchased as used or from third parties who are 
not connected to or authorised by Tecnoeka. 
TECNOEKA  SRL  shall  not  be  held  liable  for  damage,  either  direct  or  indirect,  caused  by  a  product 
fault or as the result of the forced suspension of operation. 
Repairs under warranty do not result in the extension or renewal of coverage. 

Summary of Contents for MKF 1016 S

















Reviews: