9
Glass "up"
To obtain this position, the oven door must be opened (even partially) and by acting on the
suitable “lever” in the lower portion (right side) of the door, behind the external glass, activate the
“release” device to let the internal glass “slide” up automatically.
Important
If the internal glass “release” operation is performed before using the oven (cooking chamber still
cold), it is recommended to completely open the door and act on the suitable “lever” from the
inside of the door (fig. 3). If the internal glass “release” operation is performed after using the
oven (cooking chamber is hot), it is recommended to partially open the door, let the hot air vent
off, and act on the suitable “lever” from the outside of the door using adequate heat protection
clothing (fig. 4).
Fig. 3
Fig. 4
Glass “down”
without tray trolley inserted
This position of the internal door glass lets the cooking chamber be hermetically closed without
the presence of the relevant tray trolley in or without needing to use a suitable closing partition.
The oven can be used for the PRE-HEATING function without tray trolley inserted or for the SEMI-
AUTOMATIC CLEANING function (paragraph 3.2).
Glass “down”
with tray trolley inserted
When the tray trolley is inserted, an audible alarm is activated and repeated intermittently. This
internal glass position with the tray trolley inserted, does not allow the door to be closed. If the
trolley hits against the glass it might break it:
injury hazard!
Glass “up”
without tray trolley inserted
This internal glass position without the tray trolley inserted, does not let the oven be used in any
way.
Glass “up”
with tray trolley inserted
The oven can be used regularly for cooking.
Warning
Adequate heat protection must be worn if the internal glass is moved after completing the “pre-
heating” step or after a cooking cycle, burn hazard!
