Tecnodue I.T.S. PT 355, Operating Manual

Page: 11 / 36

I.T.S. Ital Trade Services PT 355 Operating Manual
11
3.1 Beep-beep inserts reductions
To use a beep-beep inserts reduction
To use a beep-beep reduction, fix it by lightly pushing
the reduction in the direction shown as per figure
aside. As you hear a ‘click’ sound the reduction is
properly fixed.
To remove the beep-beep reduction
To safely remove the beep-beep reduction by means
of a screwdriver turn to left the screw shown in the
figure aside. As soon as the reduction is not anymore
hooked to the clamp you can remove it.
Attention: If you need to use reductions under d. 250mm you must before install the reductions d.
355x250mm