Operating instructions
– 39 –
4.
USING THE PRODUCT
The advanced technology applied to the production of this apparatus has allowed the design of a patient chair with multiple
functions and performances, all of them easily usable: all regulations and functions of the chair are coordinated, processed and
stored in a
“data bank”, by a microprocessor inside the chair.
WARNING.
Before using the information contained in this section, make sure that the chair is correctly installed, by
the service technician.
CAUTION.
Use in a clean place (specialized surgery, clinic) and avoid accidental spilling or falling of liquid substances
on the product.
CAUTION.
In case of a product malfunction that is not described in this documentation, put equipment out of service
(shut it down, unplug
main supply, mark the equipment as “out of order” or similar) and call the technical
service.
NOTE.
The chair is provided with an electronical system which detects a possible overload of the motors. This system is
designed to intervene in situations like excessive weight on the chair or mechanical locks of the movements.
4.1. T
YPICAL USE
.
To use the product, the operator must be in the proximity of the chair, while acting on the controls. Care should be taken throughout
the operation of the product, as the presence of automatic movements could cause hazardous situations, even if moderate level
ones.
The chair is provided with several emergency stop systems, e.g., in case of presence of obstacles during the movements, or if
the operator checks any unsuitable situation.
4.2. C
ONTROLS
.
L
FIG. 5
P
A
B
C
D
