Apr Finger-Card - Ver. 1.0 - 09/2011
Ver. 1.0 - 09/2011 - Apr Finger-Card
34
Multiple arming
If the option "Single arming by key" is disabled, in the arming phase it is possible to arm all the programs
associated to both the card and the reader. To select the programs approach the card to the reader and
remove it as many times as necessary.
In the disarming phase it is possible to disarm from one to all of the programs doing the necessary card
readings.
35
Arming with exclusion of open zones
The RFID cards are only enabled to arm the programs with exclusion of open zones if they have been
adequately programmed. If during the arming phase of one program some of its zones are open, the red
OCG LED is blinking. In this case, it is necessary to disarm the program again or exclude the open zones,
otherwise an alarm will be released. To arm a program and exclude the open zones hold the card on the
reader until the red LED is switched off.
Bypass
The RFID cards are only enabled to partset the armed programs if they have been adequately
programmed. The bypass temporarily excludes determined zones of the program. One single card
reading is enough to partset all the programs which are both associated to the card and armed.
