Tecno-gaz TD010TMD, Service Manual

Page: 3 / 52

Page 3 of 52
INTRODUCTION
Use of the appliance is easy and user ‐ friendly. However, it must only be used by staff who are aware of the entire contents of this manual. The
manual must accompany the machine or be easily found during operation. The TECNO ‐ GAZ Service Centre is always available for any further
information or direct assistance you may require.
This symbol shows a warning concerning the USER of the appliance.
The user SHOULD NOT try and perform any maintenance and must simply use the appliance as a replacement for
consumption liquids when required.
This symbol indicates a warning concerning a routine or unscheduled maintenance operation that must be performed only
by trained staff who are aware of both the techniques and the steps to be performed to operate the equipment in the
event of malfunctioning or failure.
When this symbol is shown, staff must contact the TECNO ‐ GAZ Service Centre or their nearest technical support centre as
soon as possible, so that a qualified technician authorised by TECNO ‐ GAZ can perform the required maintenance
operations.
TECNO ‐ GAZ S.p.A. Service Centre
Telephone +39 0521 8380
The symbol to the side indicates that the action requires the operator to be particularly careful.
This symbol is also used on specific parts of the machine that, before being used, require a careful examination of the
enclosed documentation.
The symbol to the side indicates that the operation in question involves an electrocution hazard and therefore the
operator must pay special attention.
This symbol is also used on machine parts near high voltage devices.
The symbol to the side indicates that the operation in question involves the risk of burns (hot surface of the material) and
therefore the operator must pay special attention in performing it. This symbol is also used on machinery near potentially
very hot surfaces.