TECHWOOD Beauty for Men TCO-2530, Instruction Manual

Page: 11 / 22

OIL
● To maintain your clipper in peak condition, the blades
should be oiled every few haircuts.
●
Do not use hair oil, grease, oil mixed with kerosene or
any solvent. As the solvent will evaporate and leave the thick
oil which may slow down the blades motion.
ADJUSTABLE LEVER
● The lever is conveniently located near your thumb (if you're right
handed) so it can easily be adjusted while the clipper is in your hand.
●
The lever adds versatility to your clipper by allowing you to gradually
change the closeness of your cut without an attachment comb.
●
When the lever is in the uppermost position, the blades will give you
the closest cut and leave the hair very short. Pushing the lever downward
gradually increases the cutting length.
●
In its lowest position, the lever will leave the hair approximately the
same length as a #1 comb.
●
The lever will also extend the use of your blades since
a different cutting edge is used in each setting.
●
In addition, if extremely heavy hair cutting has jammed
the blades, it will help you remove hair that has become
wedged between the two
●
blades without removing the blades.
● While the clipper is running, rapidly move the lever
from "close cut" to "longer cut" a couple of times. Doing this
each time after you have finished using your clipper will help
to keep the blades clear of cut hair.
●
If your clipper stops cutting and this does not help, your
cutting blade are dulled. Replace them with new blades.
SPECIFICATIONS
Power supply
220-240V~ 50Hz
Power 10W
Norm Class II
11