Techpro TRIDVR-EL8C Page 26 User Manual Download

Page: 26 / 225

Installation and Connections

Note: All the installation and operations here should conform to your local electric

safety rules.

3.1

Check Unpacked DVR

When you receive the DVR from the forwarding agent, please check whether there is any

visible damage. The protective materials used for the package of the DVR can protect

most accidental clashes during transportation. Then you can open the box to check the

accessories.

Please check the items in accordance with the list. Finally you can remove the protective

film of the DVR.

Note

Remote control is not a standard accessory and it is not included in the accessory bag.

3.2

About Front Panel and Real Panel

The model in the front panel is very important; please check according to your purchase

order.

The label in the rear panel is very important too. Usually we need you to represent the

serial number when we provide the service after sales.

3.2.1 HDD Installation

This series DVR has 1 to 8 HDDs (no limitation for capacity). Please use HDD of 7200rpm

or higher. Usually we do not recommend the HDD for the PC.You can refer to the

Appendix for recommended HDD brand.

All figures listed here are for reference only.

Please follow the instructions listed below to install hard disk.

Summary of Contents for TRIDVR-EL8C


































































































































































































































Search results

Summary of Contents for TRIDVR-EL8C

Reviews:

Related manuals for TRIDVR-EL8C

Brands by name

Popular brands

Techpro TRIDVR-EL8C, User Manual

Search results

Summary of Contents for TRIDVR-EL8C

Reviews:

Related manuals for TRIDVR-EL8C

Brands by name

Popular brands