Techpro TRIDVR-EL8C User Manual Download

Page: 178 / 225

202

Figure 5-66

Please refer to the following sheet for detailed information.

Parameter

Function

Channel

Here you can view channel number.
The number displayed here is the max channel amount of your
device.

Status

There are three statuses: schedule, manual and stop.

Schedule

System enables auto record function as you set in record schedule
setup (general, motion detect and alarm).

Manual

It has the highest priority.

Enable corresponding channel to record no matter what period

applied in the record setup.

Stop

Stop current channel record no matter what period applied in the

record setup.

Start all/
stop all

Check the corresponding All button, you can enable or disable all

channels record.

5.8.4.4 Advanced

5.8.4.4.1 Main Stream

The main stream interface is shown as in Figure 5-67. Here you can set corresponding

HDD group to save main stream.

Summary of Contents for TRIDVR-EL8C


































































































































































































































Search results

Summary of Contents for TRIDVR-EL8C

Reviews:

Related manuals for TRIDVR-EL8C

Brands by name

Popular brands

Techpro TRIDVR-EL8C, User Manual

Search results

Summary of Contents for TRIDVR-EL8C

Reviews:

Related manuals for TRIDVR-EL8C

Brands by name

Popular brands