Technoton DUT-E 232 Operation Manual Download Page 5

Page: 5 / 116

Revision history

DUT-E fuel level sensors. Operation manual. Version 8.1

Technoton, 2020

Revision history

Versio

Date Editor

Description of changes

1.0

01.2007

Basic version.

7.0

04.2016

•

New design of measurement head of DUT-E.

•

Changes in delivery set of DUT-E, MK DUT-E.

•

Addition and updates to description of installation of DUT-E.

•

Changes in description of Service software.

•

New packaging of DUT-E.

•

Methodology of thermal correction coefficient calculation
added.

•

International certificates ISO 9001:2015 (DaKKs)
and Customs Union added.

8.0

01.2017

•

Instructions on S6 SK operation while configuring
DUT-E CAN added.

•

Schemes of connection of DUT-E CAN to PC via S6 SK added
(including scheme of sensors for configuration within
S6 interface).

•

Terminology updated.

•

Operation instructions for software Service DUT-E updated.

•

New accessories for DUT-E added.

8.1

02.2020

1) Updated:

- currently valid certificates;
- composition of DUT-E and MK DUT-E delivery sets;

- diagrams of sensors connection to the PC with

S6 SK service adapter;

- minimum requirements for PC for work with

Service DUT-E software;

- examples of diagrams of DUT-E CAN connection

to the Telematics terminal;

- document terminology.

2) Information added on:

- sensors models codes;

- sensors electromagnetic compatibility;
- taking into account the dead zone while creating the tank

calibration table;

- additional sensors accessories.

3) The structure of the document external links is introduced.

Summary of Contents for DUT-E 232





















































































































Search results

Summary of Contents for DUT-E 232

Reviews:

Technoton DUT-E 232, Operation Manual, Page: 5 / 116

Search results

Summary of Contents for DUT-E 232

Reviews: