Instruction Manual - PH Ultraslim
Feel good through warmth from electricity - www.technotherm.de
GB
|7
Nº Default value & other possibilities
1
ProG
: Display type: simple and complete
No: Simple
Yes: Complete, all functions are available
2
dEG
: Type of degrees displayed
°C Celsius
°F Fahrenheit
3
24h
: Selection of the clock
24H (24:00)
12H (12:00 AM /PM)
4
dSt
: Daylight summer time.
Yes the automatic change over time between Summer and Winter is activated according to date
No no daylight summer time automatic change.
5
AF
: Anti Freeze temperature:
This Anti-freeze temperature used in Holiday mode.
Adjustable 0.5 to 10.0°C with default value 5.0°C.
6
_ ._
: Calibration of the internal probe
The calibration must be done after 1 day working with the same setting temperature in
accordance with the following description:
Put a thermometer in the room at 1.5M distance from the floor (like the thermostat) and check
the real temperature in the room after 1 hour.
When you enter on the calibration parameter the actual value is displayed.
To enter the value shown on the thermometer, use the (-) or (+) keys to enter the real value. Then,
press (Ok) to confirm. The logo should be displayed, to inform that a calibration is now made
and saved in the memory. If you need to erase a calibration already made press on the
navigation key left ( ). Then the logo must disappear.
* Pay attention: Only the heating element managed by the thermostat must be used during the
complete step of the calibration.
7
ITCS
: Intelligent Temperature Control System
The Intelligent Temperature Control System will activate your installation in advance (2 hours
maximum) to assure the desired temperature at the hour programmed following your weekly pro
gram. This automatic control system works in the following way:
When you start your thermostat for the first time, it will measure the time taken by your
installation to reach the set temperature. The thermostat will re-measure this time at each pro
gram change to compensate external temperature change & influence. You can now program
your thermostat without the need to adjust the temperature in advance because your
thermosat does it automatically for you.
8
WIN
: Automatic detection of open windows.
This feature allows detect automatically if you open a window.
No: deactivation of the function.
Yes: Activate the function
9
Chil
: Adjustment % of the power of the radiator electric. 25, 50, 75 and 100% power
10
POW
: Adjustment of the power of the radiator electric.
In this menu you can choose the value of the power of your radiator electric to adjust
the calculation of the consumption of your radiator. Default: 900 W
11
Clr
: Factory setting
Press and maintain (Ok) key during 10s to reset Set points temperatures and user parameters in
this menu to factory default settings. User programs will also be resetted.
