Feel good through warmth from electricity - www.technotherm.de
Instruction Manual - PH Ultraslim
Feel good through warmth from electricity - www.technotherm.de
GB
6|
•
The (+) key increased time in intervals of 30 minutes keeping the selected mode. Once you reach
the time you want to change the temperature mode press the (>)key.
•
Configure your programme using the instructions above until you reach midnight and the word
‘COPY’ will be displayed. Press the (+) button to select the days you want to copy the program. Press
the (OK) key and using the (+) key select „YES“ if you wish them to copy or ‚NO‘ if you do not wish
to copy.
•
If not is selected for any of the days then please configure using the instructions above until the last
day of the week.
After validating the seventh day, the system automatically returns to AUTO mode and your programme
mode will appear in the top right corner. For extra assistance, please contact the seller for a step by
step guide.
6. SPECIAL FUNCTIONS
• FUNCTION WINDOWS OPEN
This function will stop the radiator automatically when it detects a window open if the
radiator is running. When this feature is enabled, the icon appears at the top left of
the screen. If the system detects a fall of approximately 3 °C, it stops the heating for a
period of 1 hour. The icon will blink and the temperature will be measured by the ra
-
diator. Pressing any button at this stage will stop the detection of open windows. The
radiator will begin to function normally again and will restarts the detection of open
windows.
• POWER CONSUMPTION
Select the mode with the keys of displacement
In this screen you will see the power consumption (KWh) by pressing the button (+) in
the last 24 h (1 d), in the last 7 days (7 d) and in the last month (30).
The control of the electric radiator, computes the time in which the team has State
heating with the power of the radiator. The value of power of the radiator (default 900
W) must be correct to do so, if this value is not on your radiator you must replace it
with the correct. You can see how this value is changed in „Menu parameters“, 10 (Pow)
„Power setting“ menu.
• MENU PARAMETERS
Your thermostat has a parameter’s menu. To enter this menu, press and maintain the
validation key (OK) for 5 seconds. Then the parameter menu will appear and the first
menu screen will be displayed.
Now you can select the parameters which must be adjusted with the navigation keys
( ). Press the (OK) key to edit the parameter that you wish to modify and change its
value with (+) or (-), then confirm with (OK).
Program number
Time
Day
Actual mode
Day
