Technosoft iPOS4803-SY, Technical Reference

Page: 31 / 36


Technosoft 2022 31 iPOS4803-SY Multi Axis System, EtherCAT Technical Reference
3.14 Electrical Specifications
All parameters measured under the following conditions (unless otherwise specified):
• VLOG = 24 VDC; VMOT = 48VDC
•
Supplies start-up / shutdown sequence: -any-
• Load current (sinusoidal amplitude / continuous BLDC, DC brush) = 3A RMS
• All electrical characteristics are provided for each iPOS4803P Microdrive included in the Multi Axis System
3.14.1 Operating Conditions
Min. Typ. Max. Units
Ambient temperature 1 0 +40 ºC
Ambient humidity Non-condensing 0 90 %Rh
Altitude / pressure 2
Altitude (referenced to sea level) -0.1 0 ÷ 2.5 2 Km
Ambient Pressure 0 2 0.75 ÷ 1 10.0 atm
3.14.2 Storage Conditions
Min. Typ. Max. Units
Ambient temperature -40 100 ºC
Ambient humidity Non-condensing 0 100 %Rh
Ambient Pressure 0 10.0 atm
ESD capability (Human body model)
Not powered; applies to any accessible part
± 0.5
kV
Original packaging ± 15 kV
3.14.3 Mechanical Mounting
Min. Typ. Max. Units
Airflow natural convection 3 , closed box
Spacing required for horizontal mounting.
Between adjacent drives 10 mm
Between drives and nearby walls 10 mm
Space needed for drive removal
TBD mm
Between drives and roof-top 30 mm
Insertion force
Using recommended mating connectors
TBD TBD N
Extraction force TBD TBD N
3.14.4 Environmental Characteristics
Min. Typ. Max. Units
Size ( Length x Width x Height )
Global size
(Without connectors)
Whole System
84.8 x 94.8 x 28.1 mm
~3.33 x 3.73 x 1.1 inch
Weight - g
Cleaning agents Dry cleaning is recommended Only Water- or Alcohol- based
Protection degree According to IEC60529, UL508 IP20 -
3.14.5 Logic Supply Input (+V
LOG
)
Min. Typ. Max. Units
Supply voltage
Nominal values 9 48 V
DC
Absolute maximum values, drive operating but outside guaranteed
parameters
8 60 V
DC
Absolute maximum values, continuous TBD TBD TBD V
DC
+V
LOG
= 12V TBD
mA +V
LOG
= 24V TBD
+V
LOG
= 48V TBD
1 Operating temperature at higher temperatures is possible with reduced current and power ratings
2
iPOS4803 can be operated in vacuum (no altitude restriction), but at altitudes over 2,500m, current and power rating are reduced
due to thermal dissipation efficiency.
3 In case of forced cooling (conduction or ventilation) the spacing requirements may drop down to mechanical tolerances as long as
the ambient temperature is kept below the maximum operating limit