Technomate TM-6902HD-T2 User Manual Download

Page: 4 / 41

www.technomate.com

Your Digital Partner for Life

This receiver is preinstalled with 25 Satellite and 1500 default Channels and is fully configured.
No settings need to be changed.
After turning ON the receiver, select a language and Country. You will be taken to the
Viewing mode. Press the

SAT button on the Remote and select a satellite. To bring up the

Channel List, press the

OK button on the remote.

To delete unwanted Satellites-press the

MENU button on the remote and go to Installation.

Press

OK and OK on Satellite Setup. Press OK again and a Satellite List will appear. To delete a

Satellite, press the

BLUE(

) button on the remote.

This receiver is preinstalled with 25 Satellite and 1500 default Channels, and is fully
configured.No settings need to be changed.

Press the

MENU button on the remote.Press OK on Installation. Go to Motorised Setting and

press

OK. Go to the Third line (DiSEqC Motor) and use the Left/Right arrow buttons on the

remote to select

USALS. Then go to Position Setting and press OK. Then go to Longitude and

Latitude and enter the coordinates of where you live (London’s Longitude is 000. 1 West;
South of UK’s Latitude is 51.5 North).Press the

EXIT button on the remote. Go to GOTO and

press

OK. Wait until the Signal Quality is more than 40% in the progress bar. When a Satellite is

found, then all the selected 25 Satellites are fully configured for a Motorised system.

If the Signal Quality is below 40%, then the settings are incorrect and the Longitude needs to
be adjusted, for example: 000.2, 000.3, 000.4,5/6/7/8/9

West or East. The Latitude may also

need to be adjusted. If you still have not got a signal, then the external installation (dish, etc)
needs to be adjusted.

Press the

MENU button on the remote and go to Installation and press OK. Go to Motorised

Setting and press

OK. Press OK again to open the satellite list. Select a satellite from the list

and press

OK. Go to the Third line (DiSEqC Motor) and use the Left/Right buttons on the

remote to select DiSEqC 1.2. Go to Move and press and hold the

Left/Right buttons on the

remote until you get a Signal Quality of more than 40%. Go to Save and press

OK. Press the

RED(

)button on the remote to Scan. To scan extra satellites, repeat the above.

How to Motorise 25 Satellite & 1500 Channels with USALS in 60secs

How to Setup a DiSEqC 1.2 Motorised System

If you want to start the receiver without the preinstalled Satellites and Channels, press the
MENU button on the remote and go to System Settings and press the OK button. Go to
Factory Reset, press

OK and enter 0000. Then select Factory Reset. Press OK and select Yes.

How to do a Factory Reset to Delete the Preinstalled Satellites and Channels

Press the

MENU button on the remote and press the OK button on Installation. Press OK on

Satellite Setup and

OK again to display a Satellite List. To add a Satellite, press the YELLOW

(

)button on the remote. Press the

EXIT button on the remote to exit the list.

When the Quality Bar is at its highest level, press the

RED(

) button on the remote to Scan

the Satellite. To view a channel, press the

OK button in

the Viewing Mode (clear screen) and select any channel. To view $ (Scrambled) channels, a
CAM (Decoder) and a viewing card are required.

Press the

MENU button on the remote and press the OK button on Installation. Press OK on

Satellite Setup and

OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and

Astra 19.2E) and press the

YELLOW button on the remote for each Satellite to Save. Press the

EXIT button on the remote to exit the list.

Go to DiSEqC Switching and select a Satellite (e.g. Hotbird 13E as Number 1 and Astra 19.2E as
Number 2). When the Quality Bar is at its highest level for each Satellite, press the

RED (

)

button on the remote to Scan. To view a channel, press the

OK button in the Viewing

Mode (clear screen) and select any channel. To view $ (Scrambled) channels, a CAM
(Decoder) and a viewing card are required.

If the above installation was not successful, change the DiSEqC Switching number, e.g. Hotbird
13E as Number 2 and Astra 19E as Number 1.

How to Install a New Satellite (Fixed Non-Motorised System)

How to Setup a Monoblock or DiSEqC Switch (up to 4 LNBs / Dishes)

Press the

MENU button on the remote and press the OK button on Installation. Press OK on

Satellite Setup and

OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and

Astra 19.2E) and press the

YELLOW button on the remote for each Satellite to Save.

Press the

EXIT button on the remote to exit the list.

Press the

EXIT button again. Press OK on Motorised Setting. Press OK again to display a Satellite

List. Select a Satellite and press

OK. Go to the Third line (DiSEqC Motor) and use the Left/Right

buttons on the remote to select

DiSEqC 1.2. Go to Move and press and hold the Left/Right

buttons on the remote until you get a Signal Quality of more than 40%. Go to Save and press
OK. Press the RED button on the remote to Scan. Repeat the above for more satellites.

How to Setup DiSEqC 1.2 Motorised System

Press the

MENU button on the remote and press the OK button on Installation. Press OK on

Satellite Setup and

OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and

Astra 19.2E) and press the

YELLOW (

) button on the remote for each Satellite to Save.

Press the

EXIT button on the remote to exit the list.

Press the

EXIT button again. Go to Motorised Setting and press OK. Go to the Third line (DiSEqC