www.technomate.com
20
21
Your Digital Partner for Life
Goto Reference : Move the dish to the 0 position.
Antenna Longitude : Edit antenna longitude by pressing /
buttons and numeric buttons.
Antenna Latitude : Edit antenna latitude by pressing /
buttons and numeric buttons.
- Go To : Save the current setting of USALS System.
2.
Scan : Press Red (
) button on the remote to begin satellite search.
3.
Auto Navigation : Press Green (
) button the remote to begin auto navigation.
* Note : When you change each parameter, you need to know exact parameter of the LNB to modify L.O(local oscillator)
frequency.
- Search Type : Select the type of channel search
you want by pressing /
buttons
on the remote.
All : To search all the Free To Air and scrambled
channels, TV & Radio channels.
Free : To search Free To Air channels only.
TV : To search TV channels only.
- Network Search : Select Network Search ON/OFF
to find more transponders
through NIT Search.
- Scan : Begin channel search of the selected satellite.
5.
Auto Navigation : Press Red (
) button on the remote.
6.
Auto Navigation Blind Search : Press Green(
) button on the remote and then
begin Blind Search of the selected satellite.
* Note : Make sure that the signal level of the selected satellites is high by the signal quality bar. If the signal quality is lower
than 50%, go gack to satellite Setup and check LNB DiSEqC Switching, ect.
1. Select
DiSEqC 1.2 or USALS in the Motorized
Setting menu.
2. In the viewing mode, Press
POS button on
the remote to display
DiSEqC Motor View
Control.
3. Press /
buttons on the remote to move
DiSEqC Motor to get the best singal.
DiSEqC Motor View Control
All the available channels/satellites can be
searched in this menu. Select the satellite and
save before
Auto Search.
1. Press the
MENU button on the remote to
display the main menu.
2. Use the /
and /
buttons to move in
the menu.
3. Select
Auto Navigation, Auto Navigation
menu will appear.
4. Select the satellites you want to search by pressing the
OK button on the remote.
You can select more satellites by pressing the /
buttons and
OK button on the
remote.
Auto Navigation
1. Select the satellites you want to search by
pressing the button on the remote.
2. For
Polarization, choose from ALL, V or H. For
Scan Mode choose either Fast or Detail.
3. Press the
OK button to start scanning.
4.
Auto Navigation Blind Search : Press
Red(
)button on the remote and then
begin Blind Search of all ‘selected’ satellite.
Blind Search
