www.technomate.com
50
51
Your Digital Partner for Life
1. Connect the null model cable to the RS-232C
connection on the back of the receiver and to your PC.
2. Download the latest version of the TM Loader from the
Technomate web site (www.technomate.com).
3. Download the latest software (.STB) of your receiver
Ensure that the model number of the software is the
same as the receiver you have.
4. Click on
Browse in the TM Loader.
5. Select the file from where you saved it when you
downloaded it from the Technomate website.
6. Turn ON the satellite receiver.
7. Click on
Connect on TM Loader and then click Start
to begin the software download.
8. The downloading status is displayed.
9. Once it displays 100% Finished (wait until it has
completed erasing), the software download has
finished.
10. When it completes the writing of the new software,
disconnect the cable between the receiver and the PC.
A Factory Reset is rezuired.
11. Go to System Information on the main menu and
make sure that you have correct software version.
PIP
Press (pip key) on the remote to start PIP and “Sub Channel List” will displayed.
Select the channel using (OK key)
Press Exit to hide Sub Channel List.
Press (pip key) on the remote to change small PIP screen size.
Press (pip key) on the remote to stop PIP.
Start, Stop, Change PIP screen size
Press (pip channel list key) on the remote to display Sub Channel List.
Press (exit key) on the remote to hide Sub Channel List.
Sub channel list
Press (swap key) on the remote to swap main
with sub channel.
Swap to Channel.
