Technomate TM-6902HD-T2 User Manual Download

Page: 11 / 41

www.technomate.com

Your Digital Partner for Life

1. Press the

MENU button on the remote to

display the main menu.

2. Use the /

and / buttons on the

remote to move in the menu.

3. Select

Motorized Setting, the Motorized

Setting menu will appear.

4. Select each menu you want to edit /

change.

- Satellite : Select any satellite by pressing /

buttons on the remote.

- Transponder : Displays the current TP value of the selected satellite.

- DiSEqC Motor : Select DiSEqC Motor type OFF/1.2/USALS.

- Save : Press OK button on the remote to save.

Scan : Press Red (

) button on the remote to begin satellite search.

Auto Navigation : Press Green (

) button on the remote to begin auto

navigation.

1. Select DiSEqC 1.2 on

DiSEqC Motor, the DiSEqC 1.2 menu will appear.

- Satellite : Select any satellite by pressing /

buttons.

- Transponder : Displays the current TP value of the

selected satellite.

- DiSEqC Motor : Selected DiSEqC 1.2
- Move : Move the dish position to west/east by

pressing /

buttons.

- Move Fine : Move the dish position 1 step at a time

to west/east by pressing /

buttons.

- Motor Control : Control motor by press OK button

on the remote.

Recalculate : Recalculate the position of all other saved satellites relative to the known

position.

Reset System : Reset the position of all saved satellites.
Goto Reference : Move the dish to the 0 position.

1. Select USALS on

DiSEqC Motor, the USALS menu will appear.

- Satellite : Select any satellite by pressing /

buttons.

- Transponder : Display the current TP value of the

selected satellite.

- DiSEqC Motor : Select DiSEqC Motor USALS.
- Move : Move the dish position to West/East by

pressing /

buttons.

- Motor Control : Control Motor by press OK button

on the remote.

Goto Reference : Goto reference by pressing OK

button.

Delete Limit : Delete limit by pressing OK button.
Enable Limit : Enable the saved east and west

limit.

Set East Limit : Edit & Save east limit by pressing /

OK buttons.

Set West Limit : Edit & Save west limit by pressing

OK buttons.

- Sat Degree : Displays the current degree of the

selected satellite.
Edit degree by pressing /

buttons

and numeric buttons.

Delete Limit : Delete east and west limit.
Enable Limit : Enable the saved east and west

limit.

Set East Limit : Edit & Save east limit by pressing

OK buttons.

Set West Limit : Edit & Save west limit by pressing

OK buttons.

- Go To : Go to the position of the saved satellite.
- Save : Save the current setting of DiSEqC 1.2 system.

Scan : Press Red (

) button on the

remote to begin satellite search.

Auto Navigation : Press Green (

) button on the remote to begin auto

navigation.

Motorized Setting

DiSEqC 1.2 Setup

USALS System Setup

Summary of Contents for TM-6902HD-T2










































Search results

Summary of Contents for TM-6902HD-T2

Reviews:

Related manuals for TM-6902HD-T2

Brands by name

Popular brands

Technomate TM-6902HD-T2, User Manual

Search results

Summary of Contents for TM-6902HD-T2

Reviews:

Related manuals for TM-6902HD-T2

Brands by name

Popular brands