C
Copyright Technolog Ltd. 2017. All rights reserved.
Information contained in this document subject to
change without prior notice.
Sheet 40 of 41
Technolog Limited,
Ravenstor Road,
Wirksworth,
DE4 4FY,
United Kingdom
T: +44 (0) 1629 823611
E: [email protected]
www.technolog.com
DMR No.: 7311
2137PM9001 Rev. A
Installation: Security sealing
The Cello 6S enclosure has been designed in two halves; the main body and a removeable lid. As per "Features" section
of this manual, the main body houses the circuit board, internal antenna, SIM card and replaceable battery pack.
Temporarily removing the lid allows access to the battery pack and SIM card.
As standard the lid is fastened to the body with two M5 tamper-proof pin hex socket screws.
Security seal 'tag' points
Single security seal 'tag' fitted
- note it must be tight in order
to prevent the lid from being
opened
Additionally the two halves of the enclosure also feature pre-drilled holes that allow for the fitting of one, or more, security
seal 'tags' to prevent the lid being seperated from the body without first breaking the seal(s).
Tamper-proof screws
