C
Copyright Technolog Ltd. 2017. All rights reserved.
Information contained in this document subject to
change without prior notice.
Sheet 29 of 41
Technolog Limited,
Ravenstor Road,
Wirksworth,
DE4 4FY,
United Kingdom
T: +44 (0) 1629 823611
E: [email protected]
www.technolog.com
DMR No.: 7311
2137PM9001 Rev. A
Step 12 - Dialout settings
- Where the 'SMS' option was selected at the "Installation: Commissioning - Cello 6
Wizard: Base station details" section of this manual then the SMS contact details of the
host computer entered at that stage will be displayed in the "SMS Number" field.
- Where the 'SMS' option was not selected at the "Installation: Commissioning - Cello 6
Wizard: Base station details" section of this manual then the SMS contact details will not
be greyed out in the "SMS Number" field.
- Regardless of configuration, the telephone number of the fitted SIM card is entered, in
full including international code ('+' is automatically entered by the Cello 6 Wizard
software) and actual number (without leading '0'), in "Own Number" field.
- For example where a UK ('+44') SIM card number is 12345678907 then it is entered in
the "Own number" field as shown.
- Note if a SIM card is used only for data, TCP or GPRS, and does not feature an actual
number then it is still required that a value is entered in the "Own number" field. It is
recommended that where no number is available then the last 10 digits of the Cello's
serial number are entered here.
- Regardless of set up, the frequency that the Cello 6S will send its data is to be
selected in the "Send frequency" drop-down box - refer to the following sheets for details
of the available options.
Installation: Commissioning
- Cello 6 Wizard: Dialout settings - General
