C
Copyright Technolog Ltd. 2017. All rights reserved.
Information contained in this document subject to
change without prior notice.
Sheet 22 of 41
Technolog Limited,
Ravenstor Road,
Wirksworth,
DE4 4FY,
United Kingdom
T: +44 (0) 1629 823611
E: [email protected]
www.technolog.com
DMR No.: 7311
2137PM9001 Rev. A
Installation: Commissioning
- Cello 6 Wizard: Meter settings
(continued)
- Where the channel 2 ('Ch2') option was set at the "Installation: Commissioning - Cello 6
Wizard: Channel configuration" section of this manual, type the full serial number,
including all alphanumeric characters, of the meter attached to the " / -" inputs
of the Cello 6S in the "Meter 2" text box (this box can accept up to 13 characters).
- Typically the meter outputs one pulse for a given volume of water passed through it.
Enter the pulse value in the "Scale factor" text box.
- The volumetric 'units' which the pulse represents may be altered by selecting the
appropriate value from the drop-down box.
- Enter the current reading of "Meter 2" by first selecting "Edit" then typing the value, to
the resolution of the scale factor chosen above, into the text box.
- Review both meter settings and when they are are set as required, select "Next".
